How to Root a Samsung Fascinate Android Phone with Ubuntu Linux

These are the steps I took to root my Samsung Fascinate. Rooting gives the following abilities and more:

  • Install custom ROMs with ROM Manager (I have not tried this yet)
  • Backup your phone with Titanium Backup
  • Block unwanted calls and messages with Mr. Number Call Block
  • Give other applications root access if needed
  • Have total control of your phone
  • Remove Bing and replace it with Google

This article assumes you have already installed the Android SDK. I also assume that you have the platform-tools directory as part of your path. If not, you will need to specify the full path whenever you see the adb command used, like ~/android-sdk/platform-tools/adb.

The first step is to get your computer to recognize the phone. I followed the instructions on the Android developer site that explain how to do it. I'll summarize the steps for Ubuntu.

First make sure your phone is setup for development by performing the following steps:

  • From the Home screen, press the Menu button, then Settings
  • Select Applications
  • Make sure 'Unknown sources' is checked
  • Select Development
  • Make sure 'USB debugging' and 'Allow mock locations' are checked

Connect your phone to the computer using the USB cable that came with the phone. Now your phone should appear in the list of usb devices:


... Bus 002 Device 006: ID 04e8:681c Samsung Electronics Co., Ltd Galaxy Portal/Spica Android Phone ...

As root, edit /etc/udev/rules.d/51-android.rules so it looks like:

SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"

Replace "04e8" with the vendor id found in your lsusb output from the previous step (it's the first four characters after ID).

Now set the permissions on the file and restart udev to enable it.

sudo chmod a+r /etc/udev/rules.d/51-android.rules
sudo /etc/init.d/udev restart

Now run the adb command and check for devices:

adb devices

List of devices attached I500cf846986 device

You should see your device listed. If you do not try restarting adb with:

sudo adb kill-server
sudo adb start-server

Assuming you have made it this far and adb can see your device, we can continue with the rooting process. The following instructions were taken from this Newbie Guide to Rooting the Fascinate.

Download and unzip root.zip into a new directory. You should have the following files:

busybox rageagainstthecage-arm5.bin su Superuser.apk

Push the rageagainstthecage-arm5.bin file over to the phone:

adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin

Shell into the phone and setup the next step:

adb shell
cd /data/local/tmp
chmod 0755 rageagainstthecage-arm5.bin

After the next step there will be a pause (for a few seconds) then you will be returned to the shell prompt. Then wait another 20 seconds or longer and you should be kicked out of the adb shell. If your phone locks up, nothing bad should happen, just try forcing a reboot by pressing and holding the power button, or removing the battery for a few seconds.


You should see the following then the command prompt again.

[*] CVE-2010-EASY Android local root exploit (C) 2010 by 743C [*] checking NPROC limit ... [+] RLIMIT_NPROC={3712, 3712} [*] Searching for adb ... [+] Found adb as PID 2200 [*] Spawning children. Dont type anything and wait for reset! [*] [*] If you like what we are doing you can send us PayPal money to [*] 7-4-3-C@web.de so we can compensate time, effort and HW costs. [*] If you are a company and feel like you profit from our work, [*] we also accept donations > 1000 USD! [*] [*] adb connection will be reset. restart adb server on desktop and re-login.

After waiting until you are kicked out of the shell, restart the adb server and re-login:

sudo adb kill-server
sudo adb start-server
adb shell

You should now be at a root (pound symbol) prompt. Exit the shell:


Now to make the root permanent do the following:

adb push su /data/local/tmp/su
adb push busybox /data/local/tmp/busybox
adb shell
mount -t rfs -o remount,rw /dev/block/stl9 /system
cat /data/local/tmp/su > /system/xbin/su
cat /data/local/tmp/busybox > /system/xbin/busybox
chmod 4755 /system/xbin/su
chmod 4755 /system/xbin/busybox

Install the Android application that controls root access:

adb install Superuser.apk

After it installs you will see Success on your screen and the connection will hang. Press Ctrl-C and reboot your phone. You should now have permanent root.

The Library of Congress has specifically exempted rooting from the DMCA (Digital Millennium Copyright Act)... This means that it is now 100 percent legal to root your Android phone (or jailbreak your iPhone) whenever you want without fear of legal action taken against you.

- David Wasserman, Android Phone Geek, "Rooting Your Phone Now 100% Legal", 2010-07-26


How to Install Android on Ubuntu Linux

Once again I've decided that I want to take a look at programming for the Android platform. One of the first things to do is to get an Android emulator and a programming environment setup. After searching around a few different sites to get the instructions I've compiled the steps to get an emulator working under Ubuntu Linux here.

Android SDK Manager

I followed the steps on the android site. Using the command line in Ubuntu, here are the steps to follow:

Install OpenJDK:

sudo apt-get install openjdk-6-jre

If you are running a 64-bit OS, then install the needed 32-bit libs:

sudo apt-get install ia32-libs

Download the latest SDK from the Android site (which, as I write this, is android-sdk_r07-linux_x86.tgz).

Uncompress the tarball into your home directory and rename it:

tar xfvz android-sdk_r07-linux_x86.tgz
mv android-sdk-linux_x86 android-sdk

Here are all of the above steps combined:

sudo apt-get -y install openjdk-6-jre
uname -m | grep -q "\(x86_64\|ia64\)" && sudo apt-get -y install ia32-libs
wget http://dl.google.com/android/android-sdk_r07-linux_x86.tgz
tar xfvz android-sdk_r07-linux_x86.tgz
[ -e android-sdk ] && mv android-sdk android-sdk.$(date +%y%m%d)
mv android-sdk-linux_x86 android-sdk

Optionally you may add the Android tools directories to your PATH by adding the following to your .bashrc file:

export PATH=${PATH}:${HOME}/android-sdk/tools:${HOME}/android-sdk/platform-tools

Now run the Android SDK and AVD Manager via:


Or, if you are running GNOME, make a custom application launcher, by either right-clicking a panel and selecting Add to panel... then adding a Custom Application Launcher, or by right-clicking the Main Menu and selecting Edit Menus then select Programming then New Item. The custom application launcher should have the following properties (substitute your $HOME directory for /home/USERNAME):

  • Type: Application
  • Name: Android SDK Manager
  • Command: /home/USERNAME/android-sdk/tools/android
  • Icon: gnome-robots.png

Now configure the Android Manager:

  • Click on Settings, then check Force https://... sources to be fetched using http://...
  • Click on Installed Packages, then Update All..., then Accept All followed by Install on the window that comes up; it will take a while to download and install everything; when it finishes, close the window (and the application if prompted to do so)
  • Redo the above step until no more updates can be performed
  • Click on Virtual Devices, then New..., give it a Name and select a version of Android for Target, then optionally add an SD Card and Hardware as desired, finally click Create AVD

You can now run this virtual android image by clicking the Start... button. Or from the command line (replacing NAME with the name of the virtual you created):

~/android-sdk/tools/emulator @NAME

You can also create a custom application launcher with that command.

The next time you want to make sure your android installation is updated you can run:

~/android-sdk/tools/android update sdk

Eclipse IDE

Even though I prefer to code in Emacs whenever possible, the recommended method of programming for the Android platform is with the Eclipse IDE. So, I'm starting with that at least until I get more used to Android programming.

At first I tried to install Eclipse with apt-get like so:

sudo apt-get install eclipse

However, I could not get the Android Development Tools to install with that version of Eclipse (Galileo v3.5.2). So, like many others have, I decided to use the latest version from their web site. I downloaded the 64-bit Eclipse Classic (Helios v3.6.1) tarball from their download page. You should download the correct version for your architecture and uncompress it in your home directory.

tar zxvf eclipse-SDK-3.6.1-linux-gtk-x86_64.tar.gz

You might want to create a custom application launcher for it with these settings:

  • Type: Application
  • Name: Eclipse
  • Command: /home/USERNAME/eclipse/eclipse
  • Icon: /home/USERNAME/eclipse/icon.xpm

Now launch Eclipse. Then select Install New Software from the Help menu and add the following sites:

Install everything from each of them in the above order.

After that finishes, select Preferences from the Window menu. Select Android on the left and set the SDK Location to /home/USERNAME/android-sdk or wherever you installed the Android SDK. When you apply it you should see a list of Android target versions. OK the change.

Now when you create a new project, you can pick Android as a type.

James DeBragga [Windows Consumer Product Manager]: Android is "free like a puppy".

spark: "Free like a puppy" is certainly much, much better than an atrociously priced and uncontrollably incontinent, rabies-infected mad hound.


10 Specific Ways to Improve Your Productivity With Emacs

I was re-reading an old post by Steve Yegge about productivity tips for using Emacs, and I wanted to comment on a few of them, but I was not able to find a way to leave a comment or email him. That combined with the fact that I haven't done a blog entry in over a year, I thought I should blog my comments here.

If you use Emacs (and you should), you owe it to yourself to read his post. He does a very good job explaining why Emacs is better at certain [most] tasks and how to configure it for an even better experience.

10 Specific Ways to Improve Your Productivity With Emacs

As I read this I realized that I had incorporated a lot of his recommendations already. Some I had not implemented, others I had tried and reversed (as noted in my comments inside my dot-emacs files). I've listed his sections that I have comments about.

Item 1: Swap Caps-Lock and Control

This time I am going to try to stick with using Caps_Lock as Control. Since I mostly use Ubuntu Linux setting up my .xmodmap files was pretty simple to do. I will be sure to try his regedit trick on Windows when I get a chance.

Item 2: Invoke M-x without the Alt key

I had this switched off because I was using the C-xC-m key for starting Mingus, but I'm going to try the keybindings he recommends.

Item 3: Prefer backward-kill-word over Backspace

I find it hard to switch finger-memory modes when switching between Emacs' cut/copy/paste bindings and the standard CTRL-X/C/V ones that so many other applications use. Because of this, I use cua-mode. It allows me to keep the Emacs functionality of those keys while still being able to use them as needed. Having said this, I still want the original Emacs cut binding C-w to work as expected.

Since the kill-region command should only be called when a region has been selected, I wrote some code to solve this issue for me. Using the following code will do-the-right-thing when you press C-w:

(defun kill-region-or-word ()
  "Call `kill-region' or `backward-kill-word' depending on
whether or not a region is selected."
  (if (and transient-mark-mode mark-active)
      (kill-region (point) (mark))
    (backward-kill-word 1)))
(global-set-key "\C-w" 'kill-region-or-word)
Dialog Boxes: The Root of All Evil

Just had to say that I completely agree.

Item 7: Lose the UI

Being nitpicky here but when should be used instead of if in the following code:

(if (fboundp 'scroll-bar-mode) (scroll-bar-mode -1))
(if (fboundp 'tool-bar-mode) (tool-bar-mode -1))
(if (fboundp 'menu-bar-mode) (menu-bar-mode -1))

Like so:

(when (fboundp 'scroll-bar-mode) (scroll-bar-mode -1))
(when (fboundp 'tool-bar-mode) (tool-bar-mode -1))
(when (fboundp 'menu-bar-mode) (menu-bar-mode -1))
Keyboard Macros

As mentioned in the comments section, after you've created a keyboard macro with C-x( and finished it with C-x), and then used it once via C-xe, you can then repeat it by just pressing e.

That's about it for my comments. I hope Steve writes more articles on this topic and finishes his remaining 40 tips.

For more interesting Emacs sites see my previous blog entry about this topic.

If you don't use emacs, you're a pathetic, mewling, masochistic weakling and I can't be bothered to convert you.

-— Ron Echeverri


Rules for Writing Cross Platform Code

After reading this interesting blog about creating petabyte size storage servers I found this entry about rules to follow when writing cross platform code by Brian Wilson to be a good read for anyone doing cross platform coding in C/C++ (or any language for that matter).

The author works for Back Blaze which seems like a nice inexpensive backup service. I will probably subscribe to their services once they have a Linux client. It is a little hard to ignore the irony of the cross platform article when the Linux client is still missing, however, anyone that has worked for a software corporation knows there are often many other non-technical reasons for their product release decisions.

There are 10 types of people in the world: those who understand trinary, those that don't, and those that confuse it with binary.


Apache 2 Web Server Configuration

I finally got my site backup up and working on a new server. A very quiet Dell Studio Slim 540s, running Ubuntu 8.10 and apache 2. I had been running apache (1) on an old hand built Celeron 500MHz server that made a lot of noise and had some hard drives dying. It was long over due for an upgrade.

Installing Ubuntu 8.10 was easy enough as was moving subversion over (it was the first thing I did). All I needed to do for subversion was to rsync the directory over along with all of the other files I was copying, and start the service. Once I had my ssh keys setup, subversion worked just like it did on the old server.

Getting apache to work correctly, however, was not nearly as easy. The server itself worked fine out of the box, but I have a lot of domain names that I proxy with apache and it took me a while to figure out how to set those up correctly. After looking at far too many examples online I finally got it working. The following are the steps I took, and hopefully this will save someone else the time it took me to figure it out. Note that all of these commands need to be run as root or via sudo.

First I added some needed modules:

a2enmod proxy proxy_connect proxy_http proxy_ftp userdir

Then setup the proxy configuration by editing /etc/apache2/mods-available/proxy.conf:

<IfModule mod_proxy.c>
        ProxyRequests Off

        <Proxy *>
                AddDefaultCharset off
                Order deny,allow
                Deny from all
                Allow from all

        ProxyVia On

I did not need to make any changes to the default userdir.conf.

Now create a site file for every site you run. Here is mine for nulldot as an example:

Edit /etc/apache2/sites-enabled/nulldot:

<VirtualHost *:80>
    ServerName nulldot.net
    ServerAlias nulldot.net *.nulldot.net

    ProxyPass / http://localhost/~kyle/blog/
    ProxyPassReverse / http://localhost/~kyle/blog/

Obviously, replace nulldot.net with your domain name and point the ProxyPass and ProxyPassReverse lines to your target directory.

Then enable the site with:

a2ensite nulldot

Now restart apache2 and hopefully everything works:

/etc/init.d/apache2 restart

Getting information off the Internet is like taking a drink from a fire hydrant.

— Mitchell Kapor


How to Get Started Learning Emacs

I do realize that I'm probably quite biased on the topic of editors, but be that as it may, Emacs is simply the best editor, IDE, environment, platform, lifestyle, etc. there is. And it's high time you learned how to use it.

First a quick aside... I used vi and vim for 10 years or so before I finally decided to bite the bullet and take the time to learn Emacs. It probably took me 6 months of playing with Emacs to really get comfortable with it. Hopefully these suggestions will help lessen that amount of time for others.

I'm assuming that you can figure out how to find and install Emacs for your system. You may read how to obtain Emacs from the GNU Emacs site.


Here are some good sites for more information about Emacs:

The problem with the GNU coding standards is they ASSUME that everyone in the world uses emacs. If that were the case, free software would die because we would all have wrist problems like RMS by now and no longer be able to code.

- Knghtbrd


Android Software Development Kit

Google along with The Open Handset Alliance has released their very cool software stack for mobile phones. There is a lot of hype behind this project and a lot of people think it will be the next big thing for mobile phones. Personally, I'm very excited for the future of mobile phones as they go away from being a closed and tightly controlled environment to an open one.

Here are a few videos introducing Android:

If you are interested in programming for the Android platform it is very easy to get started. Download the SDK and follow the instructions. I recommend using Eclipse with the Android Plug-in. It comes with some example applications that are interesting to look at.

Here are some videos that give a technical overview and a programming example:

I've mentioned the OpenMoko and Qtopia Greenphone projects before, which have similar goals, but lack the backing and hype that Android has.

I worry about my child and the Internet all the time, even though she's too young to have logged on yet. Here's what I worry about. I worry that 10 or 15 years from now, she will come to me and say "Daddy, where were you when they took freedom of the press away from the Internet?"

- Mike Godwin, Electronic Frontier Foundation


Rockbox Open Source Jukebox Firmware

After hearing me complain about Apple's move to deliberately block non approved software from interfacing with their iPods, a friend/coworker of mine recommended I try running Rockbox on my iPod Photo. So about a week ago I installed it and gave it a try.

It was easy enough to install, although I couldn't get the RockboxUtilityQt installer to work. I followed the directions on installing manually from Linux, copied the files to my iPod's root directory, ran the ipodpatcher program to install the new boot loader, then rebooted my iPod.

I found Rockbox intuitive to use, and so far everything just works as I would expect. It has different font themes including one that looks like the original iPod font. It plays music very well, has play lists, and a bunch of fun games. It supports over 15 codecs, including MP3, Ogg, AAC, WMA, Real Audio, etc. Also, it coexists with the normal iPod firmware, so you can switch back at boot time if you like.

I haven't played around with the play lists yet so I don't know how they compare with Apple's Smart Play Lists that I've become addicted to. One nice feature is that you can create play lists and name them on the iPod itself.

There are many features that improve upon the regular iPod firmware. For example, the volume has more range and goes a lot louder. The buttons have more functionality — combinations as well as long presses do different things.

I have noticed one thing that might be a show-stopper for me... battery life is awful when running Rockbox. However, this is a known issue and a fix is in the works.

CNET has a nice write-up of Rockbox.

Don't be trapped by dogma — which is living with the results of other people's thinking.

- Steve Jobs


Photosynth Multidimensional Picture Spaces

Even though I think all of the Microsoft Operating Systems suck eggs, many of Microsoft's other products are impressive. First there was Office, then Visual Studio, and now something really cool... Photosynth.

Have a look at this presentation of it by Blaise Aguera y Arcas at a TED conference.

The only down side is that it only runs on Windows XP or Windows Vista. Hopefully it will be ported to other Operating Systems.

Phase One: Collect underpants.
Phase Two: ?
Phase Three: Profit.

— South Park Gnomes


Flash for 64-bit Firefox in Ubuntu

I use 64-bit Ubuntu on my workstation at work. It needs to be 64-bit because I use 64-bit images of Red Hat for development and testing. Most software that I need works well with the exception of flash in Firefox.

I never really cared too much about this at work before since I usually don't visit a lot of flash based sites. Although it did kind of suck not being able to play the cool YouTube video all of my coworkers were watching.

Well, after my last blog entry caused my work browser to crash I decided to do something about it. I found some great directions in the Ubuntu Forums that cover many options. The one that worked for me was the Nspluginwrapper script (towards the end).

Until Adobe gets of their butt and makes a 64-bit version of their latest flash, this is a good alternative.

You can't drink all day if you don't start in the morning.